Water levels and load sizes – Whirlpool Generation + LB5500XL User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPEED 5 CYCLE
Permanent Press
OOL DOWN Care
pull start
push stop
permanent
press
knits
gentle
pre-wa$h\
Water Levels and
Load Sizes
The
LOAD SIZE SELECTOR
lets you
control the amount of water that fills
the washer. The water level can be set
for extra small or large loads, with two
levels In between.
WATER LEVELS
Setting
EX SMALL
LARGE
Gallons/Liters
7.7/29.1
10.2/38.6
12.5,'47,3
14.8 56.0
' Approximate fill with load.
To save water and energy,
match the water level to the load
size.
For the best cleaning results, the
load should move freely In the water.
Watch for rollover. An Item [like a sock)
should sink in the middle and come
up later on the outside.
Be sure to read pages 11 -13 in
your Laundry Guide.
You will find more
information on loading and load sizes.
IMPORTANT;
• The EX SMALL setting is
designed for very small loads. It
uses very little water. Too big a
load in this amount of water may
tear some items.
• The EX SMALL setting in the REG/
HEAVY Cycle may cause water
to splash over tub. If this happens,
move the LOAD SIZE SELECTOR to
a higher water level.
IMPORTANT; Use the LARGE water
level setting for best permanent
press results.