Starting your washer, Select cycle and wash time, Start the washer – Whirlpool LA34OOXP User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting
your washer:
1 Measure and add detergent
2. Place sorted load in washer
3. Start washer.
Select CYCLE and WASH TIME;
1
. Start the washer
A.
Push in the Control Knob and turn
It to the right. It must be pushed in
and turned only clockwise.
C.
Start the washer by pulling out
the Control Knob. After filling, the
washer will agitate for the seiected
number of minutes.
B.
Stop on a number in the cycle you
want. The numbers are minutes of
wash time. The drawing shows 10
minutes of agitation in the REGULAR
HEAVY Cycle. NOTE: The washer will
fill only when the knob points to a
FILL area.
D.
To stop the washer at any time
push in the Control Knob. To
restart the washer, pull out the
Control Knob.