For rinsing oniy for spinning oniy – Whirlpool 2LA5700XK User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For Rinsing Oniy For Spinning Oniy
Your washer can be set to rinse
only. Use the setting for an extra rinse,
or for laundry that only needs a rinse
and spin
There is a dot just after the num
bers in PERMANENT PRESS, REGULAR
HEAVY and KNITS GENTLE, If you push
in on the Cycle Control Knob, turn
the pointer to one of those dots and
pull the Control Knob out, the washer
will fill, agitate, drain and spin
If you want high agitation and
spin, use the dot in REGULAR HEAVY, If
you want low agitation and spin, use
the dot in KNITS GENTLE, Use the dot in
PERMANENT PRESS if you want high
agitation and a low-speed spin.
There may be times when you
want to drain out all the wash water
and start over. To stop the washer at
any time, just push in on the Cycle
Control Knob
To set the washer so it drains
and spins water out of the load, push
n on the Control Knob, turn the dial to
the right [clockwise) so the pointer is
touching the bar just before CEE in
any cycle.
The washer will drain, spin out
water and stop. If you want a low-
speed spin, use the bar on PERMA
NENT PRESS or KNITS GENTLE, All the
other cycle settings have a high-speed
spin.