Starting your washer, Select water, Temperatlres – Whirlpool LA54OOXP User Manual
Page 4: Load sizes and water levees, Select a 1. load size select water 2. temperatlres, Do not overload washer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting
your washer;
1 Measure and add detergent
2 Place sorted load in washer
3 Start washer
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATLRES
• Turn the knob to point at a setting
that describes the size ot load you
want to wash
• The wafer level can be set for SMALL
(a few items) or LARGE (a full load).
DO NOT LOAD
ABOVE CLOTHES GUARD
NOTE: Use the LARGE water level
for best permanent press results.
• Match the wash water temperature
to the type of fabrics and soils being
washed.
• All rinses are cold.
Recommended
wash
temperatures
can be found in your "Laundry Guide”
IMPORTANT: Use warm water
with the PERM’T PRESS or KNITS/
GENTLE cycles. For heavily
soiled permanent press or knit
clothes, pre-wash or pre-soak
before washing in warm water.
LOAD SIZES AND WATER LEVEES
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
'Approximate
till with load.
DO NOT
OVERLOAD WASHER.
LARGE (17.3 gals./65.5 L)*
SMALL (9.5 gals./36.0 L)*