Using the suds-miser* system, Saving your wash water – Whirlpool LSS7233AN0 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

O P E R A T I N G Y O U R W A S H E R

Using the SUDS-MISER* system

Your SUDS-MISER system saves the wash

water from both the Regular and Delicate

cycles. It does not save the wash water from the
Permanent Press cycle. The SUDS-MISER

system uses two drain hoses:

• The suds return hose moves a portion of the

used wash water to a storage tub, then back
into the washer for use during the next wash.

• The drain hose carries the wash water to a

standpipe drain or to another tub with an open
drain.

NOTE: A

standpipe drain is available for

placement in the drain opening. To order, ask

for In-Tub Sfandpipe, Part Number 09121, from
your nearest authorized Whirlpool dealer.

storage tub

Drain hose

Standpipe

Wash system using one iaundry
tub and a standpipe

Storage tub

Wash system using one laundry
tub and an in-tub standpipe

Storage tub

Drain hose

Drain tub

Wash system using two wash tubs

NOTE:

The end of the suds return hose has a

plastic strainer to prevent objects from being
pulled into the washer during Suds Return.

Saving your wash water

1. Turn the Cycle Control Knob to the Regular

or Delicate cycle.

2. Place a stopper in the suds storage tub.

3. Pull Cycle Control Knob out.

Advertising