Caring for your range, Surface units and reflector bowls, Removing – Whirlpool FEP330Y User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C A R I N G F O R Y O U R R A N G E
Caring For Your Range
In This Section
Page
Page
Surface units and reflector bowls ...19
Cleaning chart................... ................... 22
LIft-up cooktop............................ .......... 21
The oven light.................... ................... 24
Removing the oven door.............. .......... 21
Your range is designed for ease of care. You
can do most cleaning with hems found
around your home. Cleaning your range
whenever spills or soiling occurs will help to
keep h looking and operating like new.
A WARNING
Bum and Electrical Shock Hazard
Make sure all controls are OFF and the
range is cool before cleaning.
Failure to do so could result in burns or
electrical shock.
Surface units and reflector bowls
Removing
1. Make sure all surface units are off and
cool before removing surface unhs and
reflector bowls.
2. Lift the edge of the unh, opposhe the
receptacle, just enough to clear the
element hold-down clip and the reflector
bowl.
3. Pull the surface unh straight away from the
receptacle.
4. Lift out the reflector bowl. See “Cleaning
chart” on page 22 for cleaning instructions.
19