Whirlpool 6ETl6ZK - Manual (Page 6)

Using Your Refrigerator
Continued
EXTERIOR MOISTURE CONTROL
< OFF eON ►
1
Cover frame
Exterior moisture controi
The Exterior Moisture Control on the Control
Console operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator,
1. Use the OFF setting when humidity is low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator.
Adjusting the refrigerator shelves
To remove the shelf:
1. Remove items from shelf.
2. Slide shelf straight out to the stop.
3. Lift the front.
4. Slide shelf the rest of the way out.
To replace the shelf:
1. Fit back of shelf on top of guides with wire stops
on the bottom of guides.
2. Lift the front.
3. Slide shelf in until it clears guide stops.
Moving the meat drawer and cover
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift the front.
3. Slide drawer the rest of the way out.
To replace the meat drawer:
1. Fit edges of meat drawer into supports on
the cover.
2. Slide drawer into place.
To remove the cover:
1. Push up glass insert from bottom.
2. Lift insert out with both hands.
3. Lift cover frame straight up and out.
To replace the cover:
1. Fit notches of cover frame sides over center
shelf supports.
2. Lower cover frame into place.
3. Lower glass insert into cover frame.