Starting your washer, Select water 2. temperatures, Load sizes and water levels – Whirlpool LA6OOOXP User Manual
Page 4: Select a 1. load size select water 2. temperatures
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting
your washer:
1. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATURES
' Turn the knob to point at a setting
that describes the size of load you
want to wash.
’ The water level can be set for SMALL
(a few items) or LARGE (a full load).
NOTE: Use the LARGE water level
for best permanent press results.
• Match the wash water temperature
to the type of fabrics and soils being
washed.
• All rinses are cold.
Recommended wash temperatures
con be found in your "Laundry Guide!’
IMPORTANT: Use warm water
with the PERM’T PRESS or
SHORT cycles. For heavily
soiled permanent press or knit
clothes, pre>soak before wash
ing in warm water.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
‘Approximate
fill with load.
CAUTION:
DO NOT
OVERLOAD WASHER.
LARGE (17.2 gals./65.1 L)*
SMALL (9.5 gals./36.0 L)*