Select cycle and wash time; 2. start the washer – Whirlpool LC4500XM User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3 CYCLE 3TEMP
Pprmarwnt Pr«t»
COOL DOWN Car*
puah flop ^***s&>
Select CYCLE and WASH TIME;
2. Start the washer
A.
Push in the Control Knob and turn
it to the right. It must be pushed in
and turned only clockwise.
C.
start the washer by pulling out
the Control Knob. The washer wil
fiil to its highest level with wash
water of the selected tempera
ture. After filling, the washer will
agitate forthe selected number
of minutes.
B.
Stop on a number in the cycle
you want. The humbers are
minutes of wash time. The
drawing shows 8 minutes of
agitation in the REGULAR HEAVY
Cycle.
D.
To stop the washer at any time
push in the Control Knob. To
restart the washer, pull out the
Control Knob.
To set the controls for a rinse and
spin, a drain and spin,or a pre-wash,
see page 8.