Starting your washer, Select a 1. load size select water 2. temperatures, Load sizes and water levees – Whirlpool LA5700XP User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting your washer:
1 Measure and add detergent
2. Place sorted load in washer,
3 Start washer
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATURES
• Turn the knob to point at a setting
that describes the size of load you
want to wash
• Set the knob on or between
EX SMALL (a few items) and
LARGE (a full load).
NOTE: Use the LARGE water level
tor best permanent press results.
• Mafch the wash and rinse water
temperatures to the type of fabrics
and soils being washed
• This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature) selection
Recommended wash temperatures
can be found in your "Laundry Guide'.'
LOAD SIZES AND WATER LEVEES
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
"Approximate
fill with load
CAUTION:
DO NOT
OVERLOAD WASHER.
LARGE
(17.3 gals./65.5 L)*
-
(14.7 gals./55.7 L)*
-
(12.1 gals./45.8 L)*
EX SMALL (9,5gals,/36.0L)*