Water levels and load sizes – Whirlpool LA6800XK User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AVhirlpool
2 SPEED 5 CYCLE
Magic Clean Filler
Super Capacity
COOL DOWN Care
Water Levels and
Load Sizes
The LOAD SIZE SELECTOR lets
you control the amount of water that fi
the washer. The selector can be set at
any water level between HANDWASH-
ABLE and EXTRA LARGE.
WATER LEVELS
Setting
HANDWASHABLE
MEDIUM
EXTRA LARGE
Gallons/Liters
7,8 29,5
\3,9 52,6
20,5 77,6
"Approximate fb wTh mad
To change the water eve^ setting,
move the LOAD SIZE SELECTOR to
RESET, Then move It to the setting you
want To save water and energy,
match the water level to the load
size.
For the best cleaning results, the
bad should move freely in the water.
Watch for rollover. An item (like a sock)
should sink in the middle and come
up later on the outside
Be sure to read pages 11 -13 in
\'oijr Laundry Guide.
You will find more
nformation on loading and load sizes.
IMPORTANT:
• The HANDWASHABLE setting is
designed for very small loads. It
uses very little water. Too big a
load in this amount of water may
tear some items.
• Water may splash if you use
very low water levels with REG/
HEAVY. If this happens, move the
LOAD SIZE SELECTOR to RESET. Then
move it to a higher setting.