Exterior moisture control, Changing the control settings – Whirlpool 8ET18ZK User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Exterior moisture control
The Exterior Moisture Control operates
electric heaters around the door openings.
These heaters help keep moisture from
forming on the outside of the refrigerator
cabinet.
• Use the OFF setting when humidity is low.
• Use the ON setting if moisture forms on
the outside of the refrigerator cabinet.
EXTERIC
)R MOISTURE C
ONTROL
OFF
ON
Changing the control settings
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide.
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed.
CONDITION:
REASON:
RECOMMENDED
CONTROL SETTINGS:
Refrigerator Freezer
Refrigerator
• Door opened often
section
• Large amount of food added
6 D
too warm
• Room temperature too warm
Freezer
• Door opened often
section
• Large amount of food added
4 A
too warm
• Very cold room temperature
(can’t cycle often enough)
Refrigerator
• Controls not set correctly
section
too coid
for your conditions
2 A
ice not
• Heavy ice usage
made fast
• Very cold room temperature
4 A
enough
(can’t cycle often enough)
Both
• Door opened often
sections
• Large amount of food added
fi c
too warm
• Very warm or very cold room
temperatures