Using the automatic ice maker – Whirlpool 4ED27DQ User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/663074/17/background.png)
USING YOUR REFRIGERATOR
Using the automatic ice maker
Here are a few things you will want to know
about your automatic ice maker:
• The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically.
UP to shut off the ice maker.
NOTE: Do not turn ice maker on until it is
connected to the water supply.
Instruc
tions for ice maker water supply
hookup are attached to the back of the
refrigerator cabinet.
• It is normal for ice crescents to be at
tached by a corner. They break apart
easily.
• The ice maker will not operate until the
freezer is cold enough to make ice. This
can take overnight.
• If ice is not being made fast enough and
more ice is needed, turn the Refrigerator
Control toward a higher number. Wait a
day and, if necessary, turn the Freezer
Control toward C.
• Good water quality is important for good
ice quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals (such as salt from a
malfunctioning softener) can damage the
ice maker mold and lead to poor ice
quality. If a softened water supply cannot
be avoided, make sure the water softener
is operating properly and well maintained.
UP to
stop ice
maker.
DOWN to
start ice
maker.
17