To remove the crispers, Removing the crisper cover, Removing the crispers removing the crisper cover – Whirlpool 3Ell8GK User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pull out to the stop,
lift the front
and pull again.
To remove the crispers:
1. Slide crisper straight out to the stop, lift front,
then slide out the rest of the way.
2. Replace in reverse order.
Removing the crispers
Remove the
glass insert,
Removing the crisper cover
To remove crisper cover:
1 ■ Push up glass insert from the bottom, then slide
out with both hands.
2. Lift front of cover frame and remove
cover support.
3. Lift out cover frame by pulling up and out.
To replace crisper cover:
1 ■ Fit back of cover into notch supports on walls of
refrigerator, then lower front into place.
2. Insert cover support (with the long tab toward
the front) into the groove on the underside of
the crisper cover.
NOTE:
If support needs adjustment, turn base
clockwise to raise, or counter-clockwise
to lower.
3. Slide back of glass insert into place, then
lower front.