Other operating instructions, Rinse and spin, Extra rinse option – Whirlpool 6LA932OXTWO User Manual
Page 10: Drain and spin
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
other Operating Instructions
NonMAL 10
SUPER WASH 4
KNtTSGEhfTLE
PULL START ■ PUSH STOP
Rinse and spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse
and spin.
1. Push Cycle Control Knob in,
2. Turn clockwise to one of the dots
on the dial, as illustrated.
3. Pull Cycle Control Knob out. The
washer will fill to selected level,
agitate 2-4 minutes depending on
the cycle selected, drain and spin.
Extra rinse option
You can automatically add an extra
rinse and spin to the REGULAR Cycle,
using the extra rinse option.
• Touch the Extra Rinse ON pad before
the REGULAR Cycle starts. The ON
indicator will show. The washer will
automatically go to an extra rinse and
spin after the REGULAR Cycle
is completed.
• If no extra rinse and spin is wanted in
the REGULAR Cycle, touch the Extra
Rinse OFF pad. Make sure the OFF
indicator is showing. If extra rinse is
not selected, the Cycle Control Knob
will stop at the orange line before
EXTRA RINSE OPTION when the
REGULAR Cycle is completed.
For an extra rinse in other cycles, see
“Rinse and spin."
SUPER WASH
PULL START . PUSH STOP
Drain and spin
A drain and spin may help shorten
drying times for some heavy fabrics
or special-care items by removing
excess water.
1. Push Cycle Control Knob in.
2. Turn clockwise until indicator points
to any bar just before an OFF area
on the dial, as illustrated.
3. Pull Cycle Control Knob out. The
washer will drain and spin.
10