Select cycle and wash time; 2. start the washer – Whirlpool LC45OOXS User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Select CYCLE and WASH TIME;
2. Start the washer
A.
Push in the Control Knob and
turn it to the right (as indicated by
the arrows shown above). It must
be pushed in and turned oniy
ciockwise.
C.
start the washer by pulling out
the Control Knob. The washer will
fill to its highest level with wash
water of the selected tempera
ture. After filling, the washer will
agitate for the selected number
of minutes.
B.
Stop on a number in the cycle
you want. The numbers are
minutes of wash time. The
drawing shows 8 minutes of
agitation in the REGULAR HEAVY
Cycle.
To stop the washer at any time
push in the Control Knob. To
restart the washer, pull out the
Control Knob.