Other operating instructions, Rinse and spin, Extra rinse option – Whirlpool 4LA9300XT User Manual

Page 10: Drain and spin, Rinse and spin extra rinse option drain and spin

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

other Operating Instructions

EXTRA RINSE

Rinse and spin

When using extra detergent for heavily
soiled clothes, or washing special-care

items, you may want an extra rinse
and spin.

1. Push Cycle Control Knob in.

2. Turn clockwise until indicator points

to one of the dots on the dial, as
illustrated.

3. Pull Cycle Control Knob out. The

washer will fill to selected level,
agitate 2-4 minutes depending on
the cycle selected, drain and spin.

Extra rinse option

For an automatic extra rinse in the
REGULAR Cycles:

• Touch the Extra Rinse ON pad before

a REGULAR Cycle starts. The ON
indicator will show. The washer will
automatically proceed into the extra
rinse and spin after the REGULAR
Cycle.

• If no extra rinse and spin is wanted in

a REGULAR Cycle, touch the Extra

Rinse OFF pad. Make sure the OFF
indicator is showing. If extra rinse is
not selected, the Cycle Control Knob

will stop at the orange line before
EXTRA RINSE OPTION when the

REGULAR Cycle is completed.

For an extra rinse in other cycles, see
“Rinse and spin."

Drain and spin

A drain and spin may help shorten
drying times for some heavy fabrics
or special-care items by removing
excess water.

1. Push Cycle Control Knob in.

2. Turn clockwise until indicator points

to any bar just before an OFF area
on the dial, as illustrated.

3. Pull Cycle Control Knob out. The

washer will drain and spin.

10

Advertising