Whirlpool LA6800XM User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If you need service or assistance, we suggest
you follow these four steps:
1. Before cal ling
for assistance...
Performance problems often re-'
suit from little things you con find
and fix yourself without tools of any
kind.
IF YOUR WASHER DOES NOT FILL:
Is the power supply cord
plugged in?
• Are both water faucets open?
• Are fuses blown or circuit-breaker
tripped?
• Are the water supply hoses
kinked?
• Is the Cycle Control Knob set and
pulled out?
IF YOUR WASHER DOES NOT SPIN:
• Is the lid closed?
• Is the power supply cord
plugged in?
• Is a fuse blown or circuit-breaker
tripped?
IF YOUR WASHER STOPS DURING
THE PERMANENT PRESS CYCLE:
• Remember.the washer will stop
for about 1
'/2
minutes after the
partial drain during the cool
down period in this cycle.
IF WASHER FILLS AND DRAINS
WITHOUT RUNNING:
• Make sure that the Cycle Control
Knob is pointing to a number in
the cycle.
MAKE SURE THE DRAIN HOSE IS
HIGHER THAN THE WATER LEVEL IN
THE WASHER. IF IT ISN’T...
• The washer may seem to be
draining during wash and rinse
cycles.
• Water can siphon out. (See "In
stallation Instructions.")
14