Whirlpool LB5500XK - Manual (Page 10)

SET LOAD SIZE
SET WATER TEMPERATURES
PUSH IN KNOB, TURN TO
CYCLE AND TIME
PULL OUT TO START
SOAK CYCLE
This cycle IS not for washing, it soaks, agi­
tates, spins out the water and stops (no
rinse) Use it for stained, yellowed, grey or
heavily soiled laundn/ with a detergeht
or pre-soak product. Chlorine bleach,' if
wanted, should be added to the cycle you
use after the SOAK Cycle is over.
FILL WASH SOAK
To 2 Minutes 6 Minutes
Selected m
Low
m
No
Leve
w Agitation w Agitation
• SET LOAD SIZE
• SET WATER TEMPERATURE
• PUSH IN KNOB, TURN TO
CYCLE AND TIME
• PULL OUT TO START
PRE-WASH CYCLE
Use for neavry soiled Terns that r^ay need
two washes Use enough detergent for a
single w'osh, 'vVhen the washer stops add
rwo'^e detergent and select a
cyCie
FILL WASH DRAIN
To Low High-
Selected
m
Agitation
m
Speed
Level
w w
Spin
If You Need
Service or Help,
We suggest You
Follow These Three
Steps:
1. Before calling for service ...
Problems are sometimes caused
by little things you can correct without
tools. Check this list before you call
for service
IF YOUR WASHER DOES NOT FILL:
' Is the power supply cord plugged in')’
I Are both water faucets open?
10