Lint screen, Lint removal, Cleaning should be done only by a qualified person – Whirlpool 3LE5710XM User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIRE HAZARD,
Open the lid and pull the lint screen
straight out.
A WARNING: DO NOT run the
dryer with the lint screen
loose, damaged, blocked or miss*
ing. Doing so can cause overheat
ing, damage fabrics and be a
FIRE HAZARD.
ROLL the lint off the screen with
your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into plaoe.
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. This lint
should be removed at least every 2 to 3 years, or more often, depending
on dryer usage.
Cleaning should be done only by a qualified person.
^ WARNING:
• Avoid eiectrical shock
hazard - unpiug power supply
cord or turn off electrical power.
• Avoid injury or damage - do not
put hands inside cabinet.
• Make sure dryer is cool.
1. Remove back panel
2. Avoid damaging wires, or
thermostats.
3. Remove lint from shaded area -
see art - with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and
re-1 eve I dryer.
8