Computer Tech Link 7dln - Manual (Page 7)

English - 9 English - 8
ICON CONTROL FUNCTION
Adjust the vertical picture moire
cancellation.
V. MOIRE
Adjust the horizontal picture moire
cancellation.
H. MOIRE
Adjust the rotation when the screen is
tilted left or right.
ROTATION
Display horizontal & vertical frequency
and polarity.
STATUS
Reset the screen to the Factory Preset
Display Settings.
RECALL
Degaussing keeps the monitor free from
unwanted magnetism that can result in
color impurity.
DEGAUSS
Choose different preset color temperatures
or set your own customized color
parameters.
Adjust the red gain.
Adjust the green gain.
COLOR TEMP
RED GAIN
GREEN GAIN
Adjust the blue gain. BLUE GAIN
Adjust the red bias.
Adjust the green bias.
Adjust the blue bias.
RED BIAS
GREEN BIAS
BLUE BIAS
ICON CONTROL FUNCTION
Adjust the side pin corner balance top
when the top sides of the screen are
bowed towards left or right.
T. PIN BALANCE
Adjust the side pin corner balance bottom
when the bottom sides of the screen are
bowed towards left or right.
B. PIN BALANCE
Select language for OSD (5 languages). LANGUAGE
Self Diagnosis
When the monitor doesn’t display, if you press any control key,
Self Diagnosis screen is displayed. Self Diagnosis function
checks if the status of the monitor is No Signal or Out of range.
No Signal screen is displayed when the D-
Sub signal connector is not connected or
the status of the monitor is on DPMS
mode.
Out of Range screen is displayed when
the applied frequency is under or over
normal range.
Normal range
H : 30 - 70 KHz
V : 50 - 160 Hz