Adjusting shelves, Removing the crisper, meat pan and covers, Lsing automatic ice maker and tilt ice dispenser – Whirlpool ED19MT User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Adjusting meat pan temperature... Removing freezer shelves.

Coid air flows against the

meat pan through an opening
between the freezer and the
refrigerator. This helps keep the
meat pan colder than the rest

of the refrigerator

Set the control to let more or

ess cold air through

Use Control to Adjust Meat Pan Temperatures

Adjusting shelves...

Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough to
hold bottles, milk and other neavv food items

To remove glass shelves:

1, Tit up at front

2, Lift up at back
3, Pull shelf straight out

Glass sneives aae
nec'/y Be care'u

To replace:

1, Guide the rear hooks into the slots in the shelf

supports,

2, Tit up front of shelf until hooks drop into slot Lower

front of shelf to level position

Removing the crisper, meat pan

and covers...

• Slide crisper and meat pan straight out to stop
• Lift the front
• Slide the res* of the way out

• Replace in reverse order,

Covers are held in place by two pegs at the back

and two notched tabs in front.

- Lift cover front
- Lift back oft the pegs
- Replace in reverse order

• Lift front slightly,
• Lift back off supports
• Replace in reverse order.

Lift the Front

Then the Back

Lsing automatic ice maker
and Tilt Ice Dispenser...

There ore a few things you II want to know about

the ice bin ana *he automatic me maker that fills it

• Bin 15 inside small door

on freezer door

• To open TiitTce*

Dispenser Door, push

in on handle, lift it
up, tilt door down,

• Reach in, pull bin out

part way or remove it
from freezer

• If you remove bm,

STOP ice maker by
pushing lever to OFF,

Push it back to ON
when you replace bin

ON /OFF Lever is
Behind Front
Panei

Lever

• You will hear water filling the mold and ice cubes

falling into the bin.

These are normal sounds.

• The ice maker will stop automatically when the bin

s full. It will start again when you remove ice

• Shake bin occasionally to keep cubes separated

Tips

• New plumbing connections can give the first

cubes an odd taste or color. Just throw these
away. The ice maker will refill the bin

• Cubes stored too long may develop an otf-

flavor,, like stale water. Throw them away,

• Cubes stored for more than a few weeks wil

become smaller because moving air in the

freezer is so cold that it starts a slow evapo­

ration. If you use ice often, you may never
notice shrinkage

Tmk

Advertising