Whirlpool WHKM-D30 - Manual (Page 9)

Setting the Temperature
To set the temperature of the hot and cold water:
1. Press SELECT button. The hot water icon and temperature
setting will flash.
2. Press the feature adjustment buttons, + and -, to set the hot
water temperature. The hot temperature is adjustable from
UO-F to 192“F (60°C to 89‘‘C).
3. Press SELECT button again SO the cold water icon and
temperature setting are flashing.
4. Press the feature adjustment buttons. + and -, to set the cold
water temperature. The cold temperature is adjustable from
41»Fto54“F (5“C to 12X).
5. Press SELECT button again to exit the temperature set mode.
NOTE: During normal operation of the water cooler, the cold
water icon and/or the hot water icon will flash when the unit is
cooling or heating the water.
Night Light
Press the night light button to turn on the night light sensor. The
night light sensor turns on the light when the room gets dark.
Press it again to turn off the night light sensor.
Timer
This water cooler is equipped with a timer feature. An audible
alarm will sound once the timer has finished counting down.
To set the timer:
1. Press TIMER button. The timer icon will light up, and the
minutes will begin to flash.
2. Press the feature adjustment buttons, + and -, to number of
minutes that you wish to countdown.
3. Press TIMER again and the hour will begin to flash.
4. Press the feature adjustment buttons, + and to set the
number of hours you wish to countdown.
5. Press TIMER again to exit set timer mode and start the timer.
The timer countdown will be displayed In place of the clock,
and the timer icon will flash.
To stop or cancel the timer:
1. Press STOP/CANCEL to stop and exit the timer mode.
2. Press STOP/CANCEL anytime while the timer is counting
down to cancel and exit the timer mode.
Control Panel Lock
To lock the control panel so that no adjustments can be made to
any of the features, press both features adjustment buttons, +
and -, simultaneously. The control panel lock icon will remain lit
when the control panel is locked.
To unbck the control panel, press both feature adjustment
buttons, + anc simultaneously. The control panel lock icon will
no longer be visible.
NOTE: The night light is the only feature that can be adjusted
when the control panel is locked.
Using the water dispensers
This water cooler features 2 easy-to-use water dispensers with an adjustable temperature control that works with the cold water
dispenser (on some models)
Hot water dispenser Coid water dispenser
Hot water button: The left button dispenses hot water
ranging from 140”F to 192“F (60°C to 89®C)*. To activate,
press and hold the hot water tab down and then press in on
the hot water button.
Cold to room temperature button and control: The right
button dispenses water ranging from cold (anywhere from
41 °F to 54°F [5“C to 12°C]*) to room temperature water. To
activate, press the cold water button.
The adjustable temperature control (on some models) mixes
room temperature and cold water. Slide the control to the left
for room temperature water and to the right for water from the
coldest setting on your control panel.