Installation instructions – Whirlpool LSR4311DQO User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
![background image](/manuals/663267/4/background.png)
Installation Instructions
Your demo model must be installed using the
following manual fill method.
©
2
Place the Unit into
position on the sales
floor, preferably on an
end cap next to a
Whirlpool 3-Speed
washer.
With pliers, remove the
yellow plug at the base
of the washer in the
back. The plug must be
completely removed for
the self-leveling legs to
be released.
Insert leveling legs into
correct holes at each
front corner of washer
until nuts touch
washer. Do not tighten
nuts until step 6.
Advertising