Starting your washer, Select water 2. temperatures, Load sizes and water levees – Whirlpool LA558oXP User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting
your washer:
1. Measure and add detergent
2. Place sorted load in washer.
3. Start washer.
Select a
1. LOAD SIZE
• Turn the knob to point at a setting
that describes the size of load you
want to wash.
• Set the knob anywhere on or
between EX SMALL (a few items)
and EX LARGE (a full load).
See your "Laundry Guide” for details
on load sizes.
Select WATER
2.
TEMPERATURES
• Match the wash water temperature
to the type of fabrics and soils being
washed.
• All rinses are cold.
Recommended wash temperatures
can be found in your "Laundry Guide”
and printed under the washer lid.
LOAD SIZES AND WATER LEVEES
For best cleaning results, the
load must be able to move freely
In the water. Too big a load or too
little water can cause wear or
tearing of load Items.
'Approximate
fill with load.
EX SMALL
DO NOT
OVERLOAD WASHER.
(20.5gals./77.6L)*
(16.3 gals./61.7 L)*
(12.1 gals./45.8 L)*
(7.8 gals./29.5 L)*