Cookware tips, Home canning information – Whirlpool FEC330B User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G Y O U R R A N G E

Until you get used to the settings, use the
following as a guide.

For best results, start

cooking at the high setting; then turn the
control knob down to continue cooking.

SETTING

RECOMMENDED USE

HI

• To start foods cooking.
• To bring liquids to a boil.

MED-HI

• To hold a rapid boil.
• To fry chicken or pancakes.

MED

• For gravy, pudding and icing.
• To cook large amounts of

vegetables.

MED-LO

• To keep food cooking after

starting it on a higher setting.

LO

• To keep food warm until

ready to serve.

Cookware tips

• Select a pan

that is about the same size

as the surface unit.

• NOTE: For best results and greater

energy efficiency,

use only flat-bottomed

cookware that makes good contact with
the surface unKs. Cookware with rounded,
warped, ribbed (such as some porcelain
enamelware) or dented bottoms could
cause severe overheating, which damages
the cookware and/or surface unit.

You can, however, use newer cookware

with slightly irKiented bottoms or very small
expansion channels. This cookware is
specially designed to provide the good
contact needed for best cooking results.

Also, woks, canners and teakettles with

flat bottoms suitable for use on your

cooktop are now available in most stores
that sell housewares.

• The pan

should have straight sides and a

tight-fitting lid.

• Choose medium to heavy gauge

(thick­

ness) pans that are fairly lightweight.

• The pan material

(metal or glass) affects

how fast heat transfers from the surface
unit through the pan material and how
evenly heat spreads over the pan bottom.
Choose pans that provide the best cooking
results.

• Handles

should be made of sturdy, heat-

resistant material and be securely attached

to the pan.

^CAUTION

Product Damage Hazard

• If a surface unit stays red for a long

time, the bottom of the pan is not flat

enough or is too small for the surface
unit. Prolonged usage of incorrect
utensils for long periods of time could

result in damage to the surface unit,

cooktop, wiring and surrounding areas.
To prevent damage, use correct

utensils, start cooking on HI and turn
control down to continue cooking.

• Do not leave an empty utensil, or one

which has boiled dry, on a hot surface

unit. The utensil could overheat and
could damage the utensil or surface
unit.

Home canning information

To protect your range:
• Use flat-bottomed canners/pans

for best

results.

• Use the largest surface unit

for best

results. Also, use a canner/pan which can
be centered over the surface unit and

which does not extend more than one inch
outside surface unit area. Large diameter
canners/pans, if not properly centered, trap

heat and can cause damage to the

cooktop.

• Do not place canner

on two surface units

at the same time. Too much heat will build
up and will damage the cooktop.

• Start with hot water.

This reduces the

time the control is set on high. Reduce heat
setting to lowest position needed to keep
water boiling.

• Keep reflector bowls clean

for best heat

reflection.

• To prolong the life of the elements:

- Prepare small batches

at a time.

- Do not use elements

for canning all day.

Advertising
This manual is related to the following products: