Removing the crispers and crisper cover, To remove the cover, Removing the freezer shelf – Whirlpool 4ET20ZK User Manual
Page 10: To remove the shelf
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR REFRIGERATOR
Removing the crispers and crisper cover
To remove the crispers:
1. Slide the crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Push up glass insert from the bottom,
then slide it out with both hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
To replace the cover:
1. Replace metal cover support on wall
supports in front section of cabinet.
2. Fit back corners of cover frame into notch
supports on walls of refrigerator, then
lower front onto metal cover support.
3. Slide back of glass insert into cover
frame. Then lower front to level position.
Pull out to the
stop, lift the front
and pull again.
Remove the
glass insert.
Lift front of
cover frame,
then the
back.
Removing the freezer shelf
Remove the freezer shelf for easier cleaning.
To remove the shelf:
1. Lift front of shelf slightly.
2. Lift back of shelf off supports.
3. Replace in reverse order.
10