Whirlpool LLR5144BQ0 - Manual (Page 8)

O P E R A T I N G Y O U R W A S H E R
Soak cycle
(on some models)
The Soak cycle features brief periods of agitation
and soak time to help remove heavy soils and
stains that need pretreatment.
• Use warm water when soaking laundry. (Hot
water can set stains.) See pages 13-15 for stain
removal Information.
• Use the amount of detergent or presoak additive
recommended by manufacturer.
• After the Soak cycle ends, add detergent and set
a new wash cycle.
Pre-Wash cycle
(on some models)
The Pre-Wash cycle features a brief period of
high speed agitation to help remove heavy
soils and stains that need pretreatment.
• Use warm water for prewashing stained
laundry. (Hot water can set stains.) See
pages 13-15 for stain removal information.
• After the Pre-Wash cycle ends, add deter­
gent and set a new wash cycle.
Using rinse and spin
When using extra detergent for heavily soiled
clothes, or washing special-care items, you
may want an extra rinse and spin.
1. Push Ciycle Control Knob in and turn
clockwise to RINSE, as illustrated.
2. Pull Cycle Control Knob out. The washer
will fill to selected load size, agitate, drain,
and spin.
Soak cycle
Pre-wash cycle
Using drain and spin
A drain and spin may help shorten drying times
for some heavy fabrics or special-care items
by removing excess water.
1. Push Cycle Control Knob in and turn
clockwise to SPIN, as illustrated.
2. Pull Cycle Control Knob out. The washer
will drain and spin.