Compaq iPAQ H3000 - Manual (Page 100)

a-4 Tips and Troubleshooting
Turn off sounds you don’t need
The iPAQ H3000 produces sounds in response to a number of events, such as warnings,
appointments, and screen taps or hardware-button presses. To optimize battery life, turn
off any sounds you don’t need. Tap then Settings. On the Personal tab, tap Sounds &
Reminders and clear check boxes on the Volume and Reminders tabs.
Turn off notification light
Tap then Settings. On the Personal tab, tap Sounds & Reminders. On the Remind-
ers tab, clear the Flash light for check box.
If You Forget Your Password
If you forget your password, you’ll need to clear memory on the iPAQ H3000. See “ Reset
the iPAQ H3000 and Clear Memory ”, earlier in this appendix.
If you’ve used ActiveSync or CF Backup/Restore to create a backup file, all of your pro-
gram data can be restored. Your Pocket PC password is removed and you can set a new
password.
If You Run Out of iPAQ H3000 Memory
Memory on your iPAQ H3000 is shared between storage memory and program memory.
Storage memory is used to store the information you create and programs you install. Pro-
gram memory is used to run programs on your iPAQ H3000. The iPAQ H3000 automati-
cally manages the allocation between storage and program memory. However, in some
situations, such as when memory is low, the iPAQ H3000 may not be able to automatically
adjust the allocation. If you receive a message stating that storage or program memory is
unavailable, try the following solutions: