Whirlpool 3363569 - Manual (Page 6)

Operating Your Washer
To obtain the best washing results, you must operate your washer properly. This section
gives you this important information. Page references are included for more information.
Starting your washer
1. Add measured detergent to the
washer. Then place a sorted load of
clothes In the washer.
• Sort and load clothes as described on
pages 13 and 14.
• If desired, you may also add color safe
bleach or extra detergent for the Super
Wash cycle.
2. (OPTIONAL STEP) If desired, add
measured liquid chlorine bleach to the
liquid bieach dispenser. See page 11.
• Use only liquid chlorine bleach in the
bleach dispenser.
3. (OPTIONAL STEP) If desired, pour
measured liquid fabric softener into
the dispenser. See page 11.
4. Close the washer lid.
5. Turn the Load Size Selector to the
setting that corresponds with the size
of your wash load and the type of
fabric being washed.
• The Load Size Selector is a rotary
knob. Your washer has five load size
settings
• To change the load size setting after
the washer has started to fill, turn the
Selector to the desired new setting.
6. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperatures with the type of
fabric and soils being washed.
• See page 15 for water temperature
guidelines.
dispenser
Wirm Cold
Cold Cold
WMh
Rina*
Temperature