Installing it properly, Leveling it – Whirlpool 3ED22DQ User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

BEFORE USING YOUR REFRIGERATOR

Installing it properly

1

Allow 1.25 cm (Va inch) space on each
side and at the top of the refrigerator for
ease of installation.

If the refrigerator is to be against a wall,

you might want to leave extra space on
the hinge side closest to the wall so the
door can be opened wider.

The refrigerator can be flush against the
wall.

4. Make sure ice maker water supply has

been connected. Refer to Installation
Instructions.

2

.

3.

Leveling it

Your refrigerator has 2 front leveling
screws-one on the right and one on the left.
To adjust one or both of these, follow the
directions below.

1. Remove base grille. (See page 20.)

2. To raise front, turn screw clockwise.

3. To lower front, turn screw counterclock­

wise.

4. Check with level.

5. Replace base grille. (See page 20.)

Right to raise;

Advertising