Other operating instnictions, Rinse and spin, Drain and spin – Whirlpool LA5588XY User Manual

Page 9: Pre-wash cycie, Rinse and spin drain and spin pre-wash cycle

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

other Operating Instnictions

Rinse and spin

When using extra dete^ent for heavily
soiled clothes, or washing spe<^l-care
items, you may want an extra rinse
and spin.

1. Push Cycle Control Knob in.

2. Turn clockwise to one of the dots

on the dial, as illustrated.

3. Pull Cycle Control Knob out The

washer will fill to selected level,
agitate 2 minutes, drain and spin.

Drain and spin

A drain and spin may help shorten
drying times for some heavy fabrics or
special-care ttems by removing excess
water.

1. Push Cycle Control Knob in.

2. Turn clockwise until indicator points

to the bar just before an OFF area
on the dial, as illustrated.

3. Pull Cycle Control Knob out. The

washer will drain and spin.

Pre-wash cycie

For best results, use warm water for

pre-washing stained laundry. Hot

water can set stains.

1. Use recommended amount of

pre-soak product or detergent.

2. Push Cycle Control Knob in.

3. Turn clockwise until indicator points

to a number next to PRE-WASH.

4. Pull Cycle Control Knob out. The

washer will start.

5. When the cycle is over, add

detergent for the next selected

wash cycle. The Pre-wash cycle
should always be followed by a
wash cycle.

NOTE: See the Laundry Guide for
additional pre-washing information.

Advertising