Select water 2. temperatures, Load sizes and water eevels, Starting your washer – Whirlpool LA5570XP User Manual
Page 4: Select a 1. load size
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting 1 Measure and add detergent,
your washer:
2 Place sorted load in washer.
3. Start washer.
Select a
1. LOAD SIZE
Turn the knob to point at a setting
that describes the size of load you
want to wash.
Set the knob anywhere on or be
tween EX SMALL (a few items) and
LARGE (a full load).
NOTE: Use the LARGE water level
tor best permanent press results.
Select WATER
2. TEMPERATURES
• Match the wash water temperature
to the type of fabrics and soils being
washed.
• A l l rinses are cold.
IMPORTANT: Use warm water
with the PERM’T PRESS or KNITS/
GENTLE cycles. For heavily
soiled permanent press or knit
clothes, pre-wash or pre-soak
before washing in warm water.
LOAD SIZES AND WATER EEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
•Approximate
fill with load.
CAUTION:
DO NOT
OVERLOAD WASHER.
LARGE (17.3 gals./65.5 L)*
MED (13.4gals./50.8L)‘
EX SMALL (9.5 gals./36.0L)*