Starting your washer, Select water, Temperatlres – Whirlpool LA5530XP User Manual
Page 4: Load sizes and water levels, Select a 1. load size, Select water 2. temperatlres
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting your washer:
Select a
1. LOAD SIZE
1, Measure and add detergent
2 Place sorted load in washer
3, Start washer
Select WATER
2. TEMPERATLRES
' Turn the knob to point at a setting
that describes the size of load you
want to wash.
' Set the knob on or between EX
SMALL (a few items) and LARGE
(a full load).
• Match the wash water temperature
to the type of fabrics and soils being
washed.
• All rinses are cold.
Recommended wash temperatures
can be found in your "Laundry Guide."
NOTE: Use the LARGE water level
for best permanent press results.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
'Approximate
fill with load.
CAUTION:
DO NOT
OVERLOAD WASHER.
LARGE
(17.3gals./65.5L)*
-
(14.7 gals./55.7 L)*
-
(12.1 gals./45.8 L)*
EX SMALL
(9.5 gals./36.0 L)*