Starting your washer, Select a, Load sizk select watfr – Whirlpool LA7450XM User Manual
Page 4: Temperai l res, Sizes, Water, Levels
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting
your washer
Before sterling
your washer
' Measure a-ej oca ae'ee;-'r
i' Place sorted loo-t m e ost-.u,
3 Sta"'was!'-'!
Select a
1
. LOAD SIZK
Select WATFR
2
.
TEMPERAI l RES
• Turn the knob to point at a setting
that describes the size ot load you
want to wash.
• Set the knob on or between EX
SMALL (a few Items) and LARGE (a
full load)
DO NOT OVERLOAD
WASHER
See pages 6 and 7
of your “Laundry Guide“
NOTE: Use the LARGE wafer level
for best permanent press results.
• Match the wash water temperature
to the type of fabrics and soils being
washed
• Ail rinses are cold. Cold rinses save
energy and help prevent wrinkles
from setting into fabrics.
Recommended wash temperatures
can be found in your "Laundry Guide”
and printed under the washer lid.
IMPORTANT; Use warm water
with the PERM'T PRESS OR KNITS/
GENTLE Cycles. For heavily
soiled permanent press or knit
clothes, pre>wash or pre>soak
betore washing in warm water.
LO
t
U)
sizes
and
water
levels
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can tear items
'Approximate
fill with load.
IMPORTANT: The EX SMALL setting
in the REG/HEAVy Cycle may cause
water to splash over the tub. If this
happens, move the Load Size Selec
tor to a higher water level.
LARGE (17.3 gals./65.5 L)'
(14 7 gals./55.7 L)'
(12.1 gals./45.8 L)‘
EX SMALL (9.5 gals./36 0 L)'