Whirlpool 8ET20DK - Manual (Page 9)

Changing the control settings
If you need to adjust temperatures in refrigerator • Adjust the Refrigerator Control first,
or freezer, use the settings listed in the chart • Wait at least 24 hours between adjustments,
below as a guide. If you have quêtions call our . y^en adjust the Freezer Control if needed.
Consumer Assistance Center number. (See
page 21.)
CONDITION: REASON:
RECOMMENDED
CONTROL SETTINGS:
If Refrigerator Door opened often Refrigerator 6
Section is
TOO WARM Large amount of food added
Room temperature too warm Freezer D
If Freezer Door opened often Refrigerator 4
Section is
TOO WARM Large amount of food added
Veiy cold room temperature
(can’t cycle often enough) Freezer A
If Refrigerator Controls not set correctly Refrigerator 2
Section is
TOO COLD
for your conditions Freezer A
If ICE isn’t Heavy ice usage Refrigerator 4
MADE FAST
ENOUGH Very cold room temperature
(can’t cycle often enough) Freezer A
If BOTH Door opened often Refrigerator 6
SECTIONS
are TOO WARM Large amount of food added
Very warm or very cold room
temperatures
Freezer C
Adjusting the door bins
To remove door bins;
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.