When moving the washer/dryer, Wlimpim), If washer/dryer does not operate – Whirlpool Thin Twin User Manual
Page 7: If you need assistance
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If washer/dryer
does not operate...
• Check that the circuit breaker is not
tripped or the house fuse blown.
• Check that power supply cord is piugged
into wall receptacle.
• Check that washer lid or dryer door is
ciosed.
• Check that controls are set in a running or
"ON" position.
• Check that dryer "START" button has been
firmly pushed.
If you need
assistance...
Call your dealer or local authorized service
company.
When you caii, you wili need the
washer/dryer modei number and seriai
number. Both numbers can be found on the
modei/seriai rating piate iocated behind the
dryer door on the dryer door well.
When moving the
washer/dryer...
• Disconnect the power supply cord. Tape
power supply cord securely to
washer/dryer.
• Tape the dryer drum to the front panel.
Tape the lint screen in place. Tape the
dryer door closed.
• Wedge a blanket between the tub ring
and cabinet top to restrict washer tub
movement.
• Turn front leveling iegs aii the way in.
WliMpiM)!
^ ^^CORPORATION
Part No. 3397516
©1995 Whirlpool Corporation
0
Prepared by Whirlpool Corporation, Benton Harbor, Michigan 49022
Printed on recycled paper.
10% post consumer waste/
50% recovered materials.
Printed in U.S.A.