Starting your washer, Select water 2. temperatures, Load sizes and water levels – Whirlpool LA77OOXP User Manual
Page 4: Select a 1. load size select water 2. temperatures
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting
your washer:
1. Measure and add detergent
2. Place sorted load in washer
3 Start washer.
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATURES
Turn the knob to point at a setting
that describes the size ot load you
want to wash.
Set the knob anywhere on or
between EX SMALL (a few items)
and LARGE (a full load).
DO NOT LOAD
ABOVE CLOTHES GUARD
NOTE: Use the LARGE water level
for best permanent press results.
• Seleot wash and rinse water tem
peratures by pushing a button.
• This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in your "Laundry Guide.
IMPORTANT: Use warm water
with the PER’T PRESS or KNITS/
GENTLE cycles. For heavily
soiled permanent press or knit
clothes, pre-wash or pre-soak
before washing in warm water.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
'Approximate
fill with load.
DO NOT
OVERLOAD WASHER.
LARGE (17.3 gals./65.5 L)*
-
(14.7 gals./55.7 L)*
-
(12,1 gals./45.8 L)*
EX SMALL (9,5 gals./36.0 L)*