Concord Camera Eye-Q Go 2000 - Manual (Page 22)

21
MODE - VIDEO CLIPS
Taking Video Clips:
1. When Video Clip is highlighted in the MODE
menu, press .
2. Press the Shutter button to begin recording
a continuous video clip. (fig.2.4)
3. Press the Shutter button again to stop
recording. (fig.2.5)
OR
4. The camera will continue recording until the
memory is almost full.
5. When the recording is completed, the
camera will return to picture taking mode.
Note: To view your video clips on your computer, please complete all
the steps in the Software Installation section. (P. 39)
Note: The camera ready LED will blink rapidly when the camera is
storing the video clip. Do not open the battery door or turn the camera
off while the LED is blinking, or the video clip may not be stored.
Note: To exit video clip mode before beginning to record, press MENU
to return to the Main Menu.
Mode
Size
Quality
Flash
MAIN MENU
A
A
A
M Video Clip
Self-timer
Main Menu
MODE
A
A
A
SHUTTER TO •REC
MENU TO CANCEL
A
A
A
SHUTTER TO STOP
A
A
A
•REC
fig.2.4
fig.2.5
GO 2000-E (511682-00) 3/10/02 2:31 pm Page 21