Canon LV-7255 - Manual (Page 41)

32
4. Convenient Features
The [Password] screen will be displayed.
The [Confirm password] screen will be displayed.
2. Type in a combination of the four SELECT buttons and press the OK button.
NOTE:
• A password must be four to 10 digits in length.
• When you want to cancel registering the password, press the MENU button without entering the password.
To enable the Password function:
1. Select [Advanced settings]
→
[Password] and press the button to select “On”.
3. Type in the same combination of SELECT buttons and press the OK button.
The confirmation screen will be displayed.
4. Select “Yes” and press the OK button.
The Password function has been enabled.
ᕥ Preventing the Unauthorized Use of the Projector
A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a pass-
word is set, turning on the projector will display the password input screen. Unless the correct password is entered, the
projector cannot project an image.