Casio EX-S880 - Manual (Page 101)

101
SHOOTING A MOVIE
■
Getting Ready to Shoot with Past Movie
1. In the REC mode, press [BS].
2. Use [ S], [T], [W], and [X] to select the “Past
Movie” scene and then press [SET].
This causes “ ” to appear on the monitor screen, which
indicates that Past Movie is enabled.
■
Shooting a Past Movie
1. With the camera pointed at the subject, press
[
].
2. Press [ ] again to stop shooting.
Movie recording also will stop automatically if memory
becomes full before you press [ ].
IMPORTANT!
• When Past Movie is selected, the camera continually
updates an internal buffer that holds about five seconds of
movie images of what has happened in front of the
camera’s lens. When you press [ ], your movie will start
with the buffer’s current contents and continue from there.
Be sure to keep the camera still and pointed in the direction
of the subject for some time before you press [ ] to start
shooting.
• The following operations are performed automatically to
protect the camera against damage whenever the camera
temperature exceeds a preset level during movie
recording.
– Monitor screen brightness setting changes to 0.
– “ALERT” appears on the monitor screen and recording
stops automatically, or Past Movie recording is disabled.
If this happens, turn off the camera and wait until it cools
down before trying to use it again.
[BS]