Rear camera — if equipped – Chrysler 2007 Pacifica User Manual

Page 146

Advertising
background image

NOTE:

• Ensure that the rear bumper is free of dirt and debris

to keep the system operating properly.

• Jackhammers, large trucks, and other vibrations could

affect the performance of the system.

If “Service Park Assist System” appears in the Electronic
Vehicle Information Center (EVIC) after making sure the
rear bumper is clean please see your authorized dealer.

REAR CAMERA — IF EQUIPPED
Vehicles with Navigation may be equipped with a Rear
Camera that allows you to see an on-screen image (on the
navigation screen) of the rear of your vehicle whenever it
is put into R (Reverse). The camera is located in the light
bar of the rear license plate.

Use the following steps to access the Rear Backup Cam-
era feature:

1. Start the engine.

2. Place shift lever in R (Reverse).

3. Wait three seconds, and the camera view will display
on the Navigation Screen.

NOTE:

The camera view will display only while the

vehicle is in R (Reverse).

4. Perform a visual check of the rear area.

NOTE:

CHECK ENTIRE SURROUNDINGS before

backing up.

5. Backup as necessary.

6. Place the sift lever in P (Park) or D (Drive) to exit the
Rear Backup Camera system.

146

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising