Removing a 5.25 inch drive – Compaq Evo D300v Series User Manual

Page 19

Advertising
background image

Hardware Upgrades


When you install an expansion card, make sure you press firmly on the card
so that the entire connector seats properly in the expansion card socket.

10. Replace the screw at the top of the expansion slot.

11. Replace the access panel.

12. Connect external cables to the installed card, if needed.

Reconfigure the computer, if necessary.

Removing a 5.25 Inch Drive

1. Shut down the operating system properly, then turn off the

computer and any external devices, then disconnect the power
cord from the power outlet.

2. Remove both access panels.

3. Remove the front bezel.

4. Disconnect the power, data, and audio cables, as necessary, from

the back of the drive.

2-8

Compaq Evo D300 User’s Guide

Advertising