GE 165D3080P049 - Manual (Page 14)

leiiaiaiaásii
The Problem Solver
(continued)
PROBLEM POSSIBLE CAUSE AND REMEDY
CHIPPING OF CHINA Rough handling can cause chipping. Load with care. Make sure glassware and china i
y% t •'ЬОГЧГУ^ о -Ргч.*« «Vf/МГ /v1 ГЖ П t Y f/V »>A \ ^ ^ Гк D*A
ШС sccuic anu Cctii t j<u xuusc. ^occ ptigc о iui gluicgi way icx luau giaaawaic.; xviaKc
sure tall glasses and stemware will clear the top of the tub when you push the rack into
the dishwasher.
Always use the top rack for delicate items.
SMALL AMOUNT OF
WATER STANDING
IN THE BOTTOM
OF THE TUB
Water around the outlet on the tub bottom at the back of the tub is normal. It is clean
water. It’s there to keep the water seal lubricated.
WATER WONT PUMP
OUT OF THE TUB If the entire bottom of the tub has water, you may have a dram problem. Clean the air
gap, if you have one. (See page 11.)
Check the kitchen sink. Is it draining well? \ou may need a plumber.
If dishwasher drains into disposer, run disposer to clear. Be sure disposer is not clogged.
SUDS IN THE TUB Sudsing detergents are not meant for dishwashers. USE ONLY AUTOMATIC
DISHWASHER DETERGENTS TO AVOID SUDSING.
To remove suds from the tub: Open the dishwasher. Let suds evaporate. Add 1 gallon
of cold water to the tub. Close and latch the dishwasher. Pump out water by slowly
turning the control dial until a drain period is reached.
Repeat if necessary.
DISHWASHER LEAKS Suds can cause unit to overflow. That’s why it’s so important to use a detergent that’s
ХЧ у 'Х 4XXkJXX VT VXk.7XX^X LX •
If you need more help.. .call, toll free:
GE Answer Center®
800.626.2000
consumer information service
14
-г а —- ---- ' ' --- ----------------—-r---- — '-------—