Status indicator lights, Wash cycle—cycle selector knob, Start – GE EWA4600 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ge.com

Status Indicator Lights

The Cycle Indicator Lights show what stage the washer is in. When the Selector knob is set to a new cycle, the Indicator

Lights will flash momentarily, showing what stages the cycle will go through. On models without an AUTO SOAK option,

the SOAK light will not light up.

o o o o o

FILL

SOAK

WASH RKMSE SPlW

Wash Cycle—Cycle Selector Knob

The wash cycle controls the length and intensity of the washing process. The knob can be turned in either direction.
Turning the Cycle Selector knob after starting a cycle will stop the washer and reset the cycle to the new selection.

Press STARTto begin the new cycle selection.

The chart below will help you match the wash cycle setting with your clothing. The chart is ranked from longest to

shortest cycle time and wash intensity. (Cycles vary by model.)

PREWASH

For removing surface dirt from heavily soiled clothes. Make sure to follow with a

regular wash cycle.

CASUALS

For wrinkle-free and permanent press items, and knits.

COTTONS

For heavy to lightly soiled cottons, household linens, work and play clothes.

EASY CARE

For wrinkle-free and permanent press items, and knits.

DELICATES

For lingerie and special-care fabrics with light to normal soil.

HAND WASH

For items labeled handwashable with light soils. Provides periods of agitation and soak

during wash and rinse.

SPEED WASH

For lightly soiled items that are needed in a hurry.

DRAINS SPIN

OR

SPIN ONLY

For draining the tub and spinning water out of the clothes.

AUTO SOAK

For very soiled clothes. Begins with a brief agitation, soaks for a specified period of time,

then moves through the rest of the cycle automatically.

START

Press START to begin the cycle. Pressing START again or raising the I

will blink.

I will

PAUSE

the cycle and the Cycle indicator light

To continue the cycle, press START again or close the lid. If machine is paused more than 24 hours, the cycle will be

cancelled. To stop the cycle, hold the button for 3 seconds. If water remains in the machine, select the DRAIN & SPIN
OR SPIN ONLY cycle to drain tub and spin water out of the washer tub.

Raising the lid will stop agitation or spin action, but does not pause the cycle.

LO

Q

S’

to

r-t*

S

ft
O'

3

to

O

c

O;

?5“

to

3-

o

o

r-H

3

IQ

•O’

to

O

O

3

to

C

o

CO

T3

■ D

O

ft

Advertising
This manual is related to the following products: