Canon IMAGECLASS D600 series - Manual (Page 20)

2-9
2
In
st
al
ling t
he Cano
n Adv
a
nc
ed
Prin
tin
g
T
ec
hnolo
g
y
■
Windows 2000/XP Plug and Play Windows 2000/XP Plug and Play Windows 2000/XP Plug and Play Windows 2000/XP Plug and Play
Following is the installation procedure of plug and play for “Using USB Port” under Windows
2000.
Before you install the software, make sure you do the following:
• Connect the machine to your computer ( Quick Start Guide).
• Turn on the machine ( Quick Start Guide).
• Start up Windows 2000.
.
Windows NT 4.0/2000/XP Windows NT 4.0/2000/XP Windows NT 4.0/2000/XP Windows NT 4.0/2000/XP
USB Users USB Users USB Users USB Users
NOTE
Using USB Port (USB Cable)
In order to use the printer via USB, the following requirements need to be satisfied.
• Your computer must be equipped with a USB port and it is necessary that its
operation is approved by the manufacturer.
• Windows NT 4.0 is not available for USB.
1 Plug and Play is being carried out and the USB class driver, “USB Printing Support” is
automatically detected and installed.
2 Log on as member of Administrators. The full control access right for the printer is necessary
for the installation of the CAPT.