Replaceable telephone cord, Battery replacement, Product care – GE 2-9720 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

BATTERY REPLACEMENT

Battery Safety Precautions

For

your safety, please follow these simple precautions:

• Do not recharge, disassemble, mutilate, wet or dispose of

Battery in fire.

• Keep Battery out of reach of children.
• Replace only with GE Cat. #5-2313. Accessory Order Form

included in this guide.

REPLACEABLE TELEPHONE CORD

The telephone cord (from handset to telephone wall outlet) is actual­
ly one cord which is easily replaced if damaged.

SCREW

To replace:

1. Remove modular plug from telephone wall outlet and handset.

2. Remove screw from telephone cord strain relief housing located

on the bottom of the clock radio.

3. Lift off housing and unwrap cord around the strain relief, as in­

dicated in the illustration, and replace housing and screw.

To keep your GE Telephone working and looking good, follow these

few simple rules;

PRODUCT CARE

Avoid putting tele­
phone new heating

appliances or other
high temperature
sources.

Try to avoid putting

telephone near

heating appliances

and devices that

generate electrical
noise (i.e., motors,
fluorescent tamps).

Telephone should not

be exposed to direct

sunlight or moisture.

Avoid dropping the
Handset as weil as

other rough treat­

ment to the phone.

Clean telephone with a
soft cloth dampened

with water. (Remember

to first unplug phone

from wall outlet.)

Never use a strong

cleaning agent or
abrasive powder, as
this will damage the
finish.

Retain the original

packaging, should you

need to ship the phone

at a later date.

Advertising