Status indicator lights, Control settings, About the dishwasher control panel – GE EDWSO00 User Manual

Page 6: Cycles

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

O

■S

o

3

b

to

c

V)

C

to

You con locate your model number on the tub wall just inside the door. Throughout this manual, features and
appearance may vary from your model.

About the dishwasher control panel.

(For models without a sensor: EDW4000 Series,

EDW5000 Series, GHDA400 Series, GLD4000 Series, GLD5000 Series and HLD4000 Series)

Control Settings

to

.CL

cn

.C

o
o

-c

(A

-Si

3

3

R

§-

to

B

3

to

co

o

Status Indicator Lights

The Status display tells you what's happening while the dishwasher is in operation and may flash,

indicating a malfunction (see page 8). The lights will come

ON

indicating the sequence

of operation the dishwasher is in.

SANITIZED

(on some

models)

Displayed when cycle has met sanitization conditions. Light remains

ON

until

door is opened.

CLEAN

(on some

models)

Displayed when a wash cycle is complete. The light stays

ON

as a reminder that

the dishes are clean until the door is opened or until another cycle is selected.

Cycles

The light above the selected pad will be ON to indicate which cycle has been selected.

SANI WASH

(on some

models)

7.3 gal., 97 min.

This cycle raises the water temperature in the final rinse to sanitize your dishware.

The cycle length will vary depending on the temperature of your inlet water.

NOTE:

The

SANI-WASH

cycle is monitored for sanitization requirements. If the

cycle is interrupted during or after the main wash portion or if the incoming water

temperature is so low that adequate water heating cannot be achieved, the

sanitizing conditions may not be met. In these cases, the sanitized light will not

illuminate at the end of the cycle.

NOTE:

NSF certified residential dishwashers are not intended for licensed food

establishments.

POTS & PANS

or

HEAVY

WASH

8.5 gal.. 89 min.

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-

on soils. Everyday dishes are safe to be used in this cycle.

NORMAL WASH

5.9 gal.. 56 min.

This cycle is for medium/heavily soiled dishes and glassware.

LIGHT WASH

(on some

models)

6.1 gal., 36 min.

This cycle is for everyday dishes and glassware.

CHINA CRYSTAL

6.1 gal., 39 min.

(on some This cycle is for lightly soiled china and crystal,

models)

RINSE ONLY

1.2 gal., 6 min.

For rinsing partial loads that will be washed later. Do not use detergent with

this cycle.

NOTE:

Only the

SANI-WASH

cycle has been designed to meet the requirements of Section 6,

NSF 184 for soil removal and sanitization efficacy.

Advertising