Geniatech ATV1200 User Manual
Page 3
[01] Standby
[02] keyboard
[03] Navigation Key
[04] Home
[05] Exit
[06] Left mouse button
[07] Right mouse button
[08] Up/Down/Left/Right/OK
[09] Menu
[10] Notification
[11] Mute
[12] Page up
[13] Volume+
[14] Zoom in
[15] Zoom out
[16] Page down
[17] Volume-
[18] IR learning Activate
[19] Power On/Off of IR Device 1
[20] Power On/Off of IR Device 2
[21] Learned TV Remote Zone
[22]&[23]Reserved learing zone for IR Device 1&2
Notes:
If there is no any LED light on the remote control, it means there is no power, please
connect micro USB cable to charge up the battery, and the left red LED will flash while
charging.
If you can’t use remote control any more, please try to check codes:
Press” home+note” buttons together for 3 seconds, LED will quickly flash, then slowly flash
for three times within 30 seconds, this means successfully done.
How to use infrared learning function:
1. Press and hold
” set “button for 5 seconds, the indicator will light up, enter into learning
status.