Kenmore 362.7562 - Manual (Page 10)

SETTING THE OVEN CONTROL, CLOCK AND TIMER
1. BAKE/TEWIP RECALL Pad. Press this pad to select
the bake function,
BAKE Light. Rashes while in edit mode—you can
change the oven temperature at this point. Glows
when the oven is in bake mode.
2 START Pad. Must be pressed to star! any cooking or
cleaning function.
3. DISPLAY. Shows the time of day, oven temperature,
whether the oven is in the bake, broil or self-cleaning
mode and the times set for the timer or automatic
oven operations. The display will show PRE while
preheating. When the oven reaches the selected
temperature, the oven control will beep and the
display will show the oven temperature.
If “F- and a number or letter" flash in the display and the
oven control signals, this indicates a function error code.
If your oven was set for a timed oven operation and a
power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there has
been a power outage. Reset the clock.
If the function error code appears during the self-cleaning
cycle, check the oven door latch. The latch handle may
have been moved, even if only slightly, from the latched
position. Make sure the latch is moved to the right as far
as it will go.
Press the STOP/CLEAR pad. Allow the oven to cool for
one hour. Put the oven back into operation. If the function
error code repeats, disconnect the power to the range
and call for service.
4. KITCHEN TIMER ON/OFF Pad. Press this pad to
select the timer feature. Use the A and ▼ pads to
adjust the time.
TIMER Light. Flashes while in edit mode—you can
change the set time at this point. Glows when the timer
has been activated. Flashes again when the time has
run out until the control is reset
5. CLOCK Pad. To set the clock, press this pad twice
and then press the A and T pads. The time of day
will flash in the display when the oven is first turned on.
6. DELAY START ON/OFF Pad {on some models).
Use along with the COOKING TIME or SELF CLEAN
pads to set the oven to start and stop automatically
at a time you set.
DELAY START ON/OFF Light (on some models).
Flashes while in edit mode—you can change the start
time at this point. Glows when the function has been
activated,
7. COOKING TIME ON/OFF Pad (on some models).
Press this pad and then press the A or T pads to
set the amount of time you want your food to cook.
The oven will shut off when the cooking time has
run out,
COOKING TIME ON/OFF Light (on some models).
Flashes while in edit mode—you can change the set
time at this point- Glows when the function has been
activated. Rashes again when the time has run out until
the control is reset.
10